DMX-IN [Simple Protocol]

   Print  Previous  Next
Introduction
Overview
Other Protocols

 

 

Introduction

The Simple protocol is a pre-configured DMX protocol [or profile] you can use for Remote Control.

Simple Protocol uses 4 DMX channels.
Valid incoming DMX values are 0 - 255.

 

 

Overview

DMX Channel

Remote Control Function

DMX Values

Functionality

Comment

01

Storage Left Storage ID

0 - 255

Storage, Left, 1 - 256

Choose Storage 1 to 256 on the Left side.

02

Storage Left Place +Fade

0 - 255

Storage Place, Left, 1 - 256

Choose your Storage Place in the selected Storage on the Left side. A fade of the crossfader is applied automatically according to the Fade Time.

03

Fade Time In 1/10 Seconds

0 - 255

Fade Time, 0 - 10s

0 = 0s

127 = 5s

255 = 10s

Steps of 2 or 3 = 0.1s

Set up the Fade Time of the crossfader in tenths of a second.

04

Global Master

0 - 255

0 - 255

Control the overall intensity.

 

 

Other Protocols

There are other preprogrammed DMX protocols you can choose from:

»DMX-IN [Simple Protocol]
»DMX-IN [General Protocol]
»DMX-IN [Advanced Protocol]
»DMX-IN [User]

 

MADRIX 3.6j
[Ctrl & +/-] = Zoom In/Out | [Ctrl & 0] = 100%
Print   Previous   Next