RDM [Remote Device Management]

  Previous  Next

 

 

Introduction

Remote Device Management is a technical standard that enables the base features of MADRIX RADAR thanks to the bi-directional communication it defines between controllers, hardware interfaces, and devices. MADRIX RADAR uses RDM over Art-Net. This data tunnel is referenced as the ArtRdm subcategory within Art-Net.

 

 

Overview

MADRIX RADAR [software version 1.3.] supports:
- ANSI E1.20 – 2010
- ANSI E1.37-1 – 2012
 

The standard is defined as ANSI E1.20 - 2010, Entertainment Technology - RDM - Remote Device Management Over DMX512 Networks.

The standard is defined as ANSI E1.37-1-2012, Additional Message Sets for ANSI E1.20 (RDM) – Part 1, Dimmer Message Sets.

It has been published by PLASA North America.

It has been approved as an American National Standard by the ANSI Board of Standards.

 

MADRIX RADAR 1.3.
[Ctrl & +/-] = Zoom In/Out | [Ctrl & 0] = 100%
 Previous   Next

 


Enable automatic translation | Activer la traduction automatique |