Firmware Updates

  Previous  Next

 

Overview

It is highly recommended to update the firmware should a new firmware version become available.
You can update the device in different ways.

 

 

MADRIX HARDWARE MANAGER

To update your devices, please use the separate MADRIX HARDWARE MANAGER software.
Learn more »MADRIX HARDWARE MANAGER [USB / Ethernet]

 

 

Available Firmware Updates

Version

Highlights

ORION Firmware
2.00.7140
 
MADRIX Version
MADRIX 5.0b
 
Release Date
July 2018

Initial firmware release.

ORION Firmware
2.01.7147
 
MADRIX Version
MADRIX 5.0d
 
Release Date
August 2018

Fixed a critical issue that could halt the device in rare cases.

ORION Firmware
2.02.7206
 
MADRIX Version
MADRIX 5.0e
 
Release Date
February 2019

During normal operation, pressing the Reset button now sends an Art-Net PollReply [e.g., Device Manager] and a MADRIX PollReply [MADRIX Device Configuration].

Fixed an issue that did only apply a new IP address after changing it over USB after disconnecting it from power first.

ORION Firmware
2.03.7236
 
MADRIX Version
MADRIX 5.1
 
Release Date
June 2019

Fixed an issue that only applied a new IP address that was set over USB after a power cycle.

Fixed an issue that did not allow the DMX Channel to be set with help of the MADRIX Device Configuration window over Ethernet.

Fixed an issue that allowed special characters and control characters [ASCII] in names and descriptions, which are not filtered out.

Fixed an issue that did not allow to retrieve the currently set Start Channel over USB when using the MADRIX Device Configuration window.

ORION Firmware
2.03.7252
 
MADRIX Version
MADRIX 5.1a
 
Release Date
August 2019

-

ORION Firmware
2.03.7259
 
MADRIX Version
MADRIX 5.2
 
Release Date
November 2019

-

ORION Firmware
2.03.7261
 
MADRIX Version
MADRIX 5.3
 
Release Date
May 2020

Fixed an issue that could freeze the device if RDM packages were still sent to the device, although it communicated that it does not support RDM.

ORION Firmware
2.03.7291
 
MADRIX Version
MADRIX 5.4
 
Release Date
December 2020

Fixed minor issues.

ORION Firmware
2.04.7304
 
MADRIX Version
MADRIX 5.4a
 
Release Date
February 2021

Added support for hardware version/model 1.3 (#3581, #6459, #6830).

Web configuration page: Fixed an incorrect IP address shown for sACN Multicast Mode (#6562).

Web configuration page: Fixed that the Defaults buttons did not work correctly (#6907).

Fixed a critical issue that could halt the device when receiving an Art-Net OpIpProg request (#6852).

Fixed an issue that displayed voltage at pins other than the connected pin when using Counter (Hysteresis Threshold) as Pin Input Configuration (#6902).

 

ORION Firmware
2.05.7308
 
MADRIX Version
MADRIX 5.4b
 
Release Date
May 2021

-

ORION Firmware
2.06.7355
 
MADRIX Version
MADRIX 5.4c
 
Release Date
July 2021

Note: Please reset the device to factory default settings –after– updating to this firmware version!
[Make sure to write down your current settings beforehand. All custom settings will be reset to their default values.]

Added two new measure functions: Time Interval (Short), Time Interval (Long) (#6906).

Web configuration page: Added the option to reboot the device (#7403).

Web configuration page: Added the option to reset the device to factory default settings (#7403).

Fixed an issue that could prevent changed settings from being saved in rare cases after a power cycle (#5382).

Fixed an issue that did not show the favicon in web browsers (#6460).

Fixed a critical issue that did not store values > 0 for minimum limits and set them to 0 again after a power cycle (#7400).

ORION Firmware
3.00.7380
 
MADRIX Version
MADRIX 5.4e
 
Release Date
October 2021

Updated the system of the device (#6971, #7116, #7118, #7504, #7544).

Updated the bootloader of the device (#7652).

A single bootloader now supports both Ethernet ports (#7695).

Fixed an issue that still caused the status LED for USB to fade between red and green even if USB had been disconnected (#7543).

Fixed an issue with an incorrectly initialized register that could prevent the firmware update over Art-Net (#7615).

Fixed an issue that produced issues with the USB connection for the bootloader (#7653).

Fixed an issue that did not consistently initiate a PollReply when changing settings using the web configuration page (#7689).

ORION Firmware
3.01.7385
 
MADRIX Version
MADRIX 5.4f
 
Release Date
January 2022

The bootloader can now read the hardware revision/model over USB (#7802).

Unified the way external voltages are calculated across the system (#7892).

Fixed a critical issue that could cause the bootloader on hardware revision 1.2 to freeze at startup with the status-LED Power being permanently on (#7808).

Fixed an issue that showed the external voltage for Power incorrectly on the web configuration (#7892).

Fixed a rounding error for external voltages shown on the web configuration (#7892).

Fixed a critical issue that did not apply new values when changing a large number of settings on the web configuration at once (#7895).

ORION Firmware
3.02.7387
 
MADRIX Version
MADRIX 5.4g
 
Release Date
March 2022

-

ORION Firmware
3.03.7390
 
MADRIX Version
MADRIX 5.4h

 
Release Date
April 2022

Web Configuration: Added the possibility to edit the ShortName identifier for Art-Net (#8159).

Web Configuration: Now shows the uptime of the device (#8183).

Optimized how value ranges are checked and processed (#8210).

ORION Firmware
4.01.7397
 
Bootloader
4.01.9396
 

MADRIX Version
MADRIX 5.5a
 
Release Date
July 2022

Added support for new hardware components (#8029).

Bootloader 4.0: Fixed an issue that did not always respond to firmware packets being sent over Art-Net (#8027).

Bootloader 4.0: Added support for new hardware components (#8028).

Bootloader 4.0: A single Art-Net PollReply is being sent after starting and remaining in the bootloader (#8032).

Fixed an issue that did not recognize hardware revision 1.3 (#8643).

 

MADRIX ORION User Manual
[Ctrl & +/-] = Zoom In/Out | [Ctrl & 0] = 100%
 Previous   Next

 


Enable automatic translation | Activer la traduction automatique |