▪Represent the standard controls to control the speed. Use the controls in the following way:

Slider - Move the slider to increase or decrease the speed.

Input Field - Enter the BPM speed directly.

- Valid values range from 0 to 9999.

- 60 BPM = 1 second.

Tap - Allows you to set the speed manually. Use it to get synchronous movements of effects to the beat of the music. Click this button at least four times in a row according to the beat of the music [1/4 notes]. MADRIX 5 will calculate the BPM value automatically.

Speed Pitch - Allows you to change the speed further. It works as a multiplier/a factor.

▪Example: A Speed Master of 2.0 will double the current speed.

▪Move the fader upwards to increase the speed.

▪Move the fader downwards to decrease the speed.

▪The default value is 1.0 [which is normal speed].

▪A value of 0.0 will stop the effects.

▪The highest value is +10.

▪The lowest value is -10.

▪Negative values will reverse the direction of effects [if possible].

▪Right-click on the Pitch button to reset to the value of 1.0

▪The tooltip shows the currently set value.

Speed Variance - Adds variety to the speed of each individual object.

▪ If activated, each object will have a different speed.

▪The higher the value, the larger the differences in speed between objects.

▪Valid values range from 0 to 300 or 500.

▪The default value is 0.

▪Right-click on the SV button to reset to the value of 0.

Interpolation - Adds variety to the movement.

▪ Start [Ease In], middle, and end phases [Ease Out] of the movement are run through at different speeds, creating certain movement patterns.